Chemical, Pharmaceutical & Fine Chemical

Concentrate Difficult Chemical and Pharmaceutical Wastewater

Low-temperature vacuum evaporation for selected mother liquors, reactor wash water, process concentrates and high-salinity wastewater.

Request a Wastewater Evaluation

Why This Wastewater Is Difficult

High COD and complex organic mixtures
Volatile organics can enter distillate
Variable batch chemistry and pH
High salinity, viscosity or foaming
Heat-sensitive products and intermediates

Recommended Treatment Approach

Each stream is reviewed for volatility, flammability, reaction risk, corrosion, foaming and crystallization. Pretreatment may include solvent recovery, neutralization, phase separation or oxidation. Low-temperature vacuum evaporation can concentrate suitable non-volatile components, while condensate may need polishing before reuse or discharge.

Suitable Applications and Important Limits

Potential applications include selected reactor and tank wash water, mother liquor, pharmaceutical-intermediate wastewater, fermentation or biotechnology concentration and membrane reject. Flammable, explosive, highly volatile or reactive feeds require dedicated process-safety review and may be unsuitable for a standard heat-pump evaporator.

Actual performance depends on feed composition, operating conditions and the required reuse or discharge objective. Representative testing is recommended for complex or variable streams.

Technology Options

Low-Temperature Vacuum Evaporation — liquid-waste minimization and distillate recovery.

Scraped Vacuum Crystallization — further concentration of scaling, viscous or crystallizing feeds.

Integrated ZLD — pretreatment, evaporation, crystallization, separation and polishing.

Information Needed for Evaluation

Full composition and safety data; COD/TOC; known volatile and semi-volatile organics; salts; pH; flash point where relevant; viscosity; density; boiling behaviour; daily batch volume; and target concentrate.

Tell Us About Your Wastewater

Upload your analysis, daily capacity and treatment objective for a preliminary engineering review. Your information will be treated as confidential.

Upload Water Analysis View Case Studies